Talaria 67v 3953Wh Marathon V2 11KW
Super Long Range (60v 67Ah Equivalent)
EBMX, VTB, Torp & Nucular Compatible
Free Charger Included!
Powerful and Only 16.5Kg
Tough Protective 316 Stainless Steel Case
Fully Protected BMS
*UK Warranty
Finance Available (T&Cs Apply)
Shipping: UK (Free) Additional Shipping for Highlands and Islands +£30)
EU land ship available, bank transfer only (20% VAT Removed)
For EU please email: [email protected]
Cash on collection available by appointment
Power: Medium (11 Kw)
Range: Very High (3953Kwh 263% Over OEM)
Height: Tall (373mm – will need seat lift or new lid)
#1 Usable power density is increased from a standard battery 1500Wh (heavily restricted LVC of 54V and not 48V) to 3953Wh
#2 Range is more than doubled about 2.5 times the distance.
#3 Top speed increase (fully charged) for 6-10 MPH improvement.
#4 Power increase of 12.5% and very noticeable increase in acceleration.
#5 Very simple to install (needs a battery lid hinge installation which we provide – and take 5 minutes to install – battery display on handle bar which we provide
Power
Must be used with an aftermarket Controller.
This battery is not to be used with a third party controller set higher than 160A DC or 10Kw Phase 420A.
Exoskeleton /Casing
We have upgraded the casing to marine grade 316 stainless steel, so absolutely no rust issues here! Super tough and powder coated inside and out.
Connectors
The main battery to controller connectors we use are the same type as used by Talaria to keep everything compatible. This allows you to swap your standard battery back should you wish.
Battery Compartment Lids or Lifting Kits
Because of the extra battery height (373mm) minor modification will needed to your bike.
There are several options:
#1 Fit an aftermarket battery compartment lid found here: https://electroncycles.com/product/talaria-battery-compartment-injection-moulded-battery-lid-to-fit-taller-batteries-not-3d-printed/
#2 Remove the battery plastic base tray in the bike (simply remove the 5 small allen key bolts from the top looking down) and fit our 5mm spacer between the metal battery lid catch and the lid (spacers provided)
#3 Seat Lift Kit option: https://www.electroncycles.co.uk/product/talaria-mx-seat-lift-kit-black-full-e-charged/
Voltmeter
This Talaria Battery does not have an integrated voltmeter. We supply a voltmeter that nestles in your battery lid.
Domestic Electrics
All your bike accessories are still powered. Some believe that not using the circuit breaker direct to the controller removes the safety of the circuit breaker. However, all our batteries have a full working BMS. Any power shorts or irregular current and the BMS shuts down. This is much more sensitive and accurate than a mechanical breaker (you may note that the Sur Ron Ultra Bee does not use a circuit breaker and relies on the BMS alone).
Specifications
Fitting
Connecting to Bike
Battery Charging
First time charging is VERY important. Always connect the charger to the battery with the charger powered up at the mains first. This will stop a “Connection Spark”. The battery needs a “Balance Charge” on first charge. Please charge for 12 hours first time. Always charge your battery in a safe place and never unsupervised.
Charger INCLUDED
This Battery will not work with an original standard Talaria Controller
Bike Not Included
Finance
To apply for finance please click the link: https://ideal4finance.com/retail/apply/elecyc
Electron Cycles Limited is an introducer appointed representative of Ideal Sales Solutions Ltd T/A Ideal4Finance. Ideal Sales Solutions is a credit broker and not a lender (FRN 703401). Finance available subject to status. The rate offered is always provisional and will depend upon your personal circumstances, the loan amount and term.
Warranty:
Warranty terms, please check here:
https://electroncycles.com/warranty-policy/
Disclaimer is available here:
